MP 277 - Service, Support Download

Transcript
Configuring the device
6.4 Changing settings for operation
6.4.3
Setting the Double-click
You can start applications in the Control Panel and in Windows CE with a double-click. A
double-click corresponds to two brief touches in sequence.
In the "Mouse Properties" dialog, make the following adjustments for touch screen operation
and operation with external mouse:
● Interval between two touch contacts on the touch screen
● Interval between mouse clicks
Note
If you make this setting with an external mouse on a device with touch screen, you may
encounter problems with the touch recognition.
Requirement
You have opened the "Mouse Properties" dialog using the "Mouse" icon.
①
②
Pattern
Symbol
Procedure
1. Double-click on the grid.
After one double-click, the pattern is shown in inverse colors.
2. Double-click on the icon.
If the double-click is valid, the symbol is displayed as follows:
3. If the symbol remains unchanged, double-click on the pattern again.
4. Confirm your entries.
The dialog box closes.
The double-click adjustment is completed.
MP 277
86
Operating Instructions, 07/2014, A5E02479740-02