MP 277 - Service, Support Download

Transcript
Configuring the device
6.14 Activate Memory Management
6.14
Activate Memory Management
If reorganization of the memory is required during the runtime of project, the HMI device can
shut down the project autonomously. The project is shut down and the HMI device will
display a message. You have to start the project again.
Note
If you do not activate memory management, undefined states can occur during the runtime
of the project.
Requirement
You have opened the "Memory Monitoring" tab in the "OP Properties" dialog box with the
"OP" icon.
①
②
③
Maximum memory used since the HMI device was last switched on
Currently used memory
Check box for selecting memory management
Procedure
1. In order to start memory management, activate the control box.
2. Confirm your entries.
A message is displayed briefly. The dialog box closes.
Memory management is activated.
MP 277
Operating Instructions, 07/2014, A5E02479740-02
131
Similar
MP 277 - Service, Support
MP 277 - Service, Support
WirelessKey PROFESSIONAL manual
WirelessKey PROFESSIONAL manual
Descarga  - Service, Support
Descarga - Service, Support
X5 line c - Ascon S.p.A.
X5 line c - Ascon S.p.A.
"user manual"
Visualization of Dispatching Strategies
Visualization of Dispatching Strategies
TP 277, OP 277 (WinCC flexible) - Service, Support
TP 277, OP 277 (WinCC flexible) - Service, Support
Operating Instructions HMI device MP 177 (WinCC flexible)
Operating Instructions HMI device MP 177 (WinCC flexible)
Catalog ST 80 / ST PC 2010
Catalog ST 80 / ST PC 2010
SIMATIC HMI HMI Device TP 177A, TP 177B, OP
SIMATIC HMI HMI Device TP 177A, TP 177B, OP
900 kB - Nexus Marine
900 kB - Nexus Marine
- Murdoch Research Repository
- Murdoch Research Repository
X1 line c
X1 line c
"user manual"
WinAC RTX ODK User Manual - Service, Support
WinAC RTX ODK User Manual - Service, Support
RPX Lite (RPXL_CW), User Manual
RPX Lite (RPXL_CW), User Manual
Simatic S7-200
Simatic S7-200
SIMATIC HMI HMI device MP 377 (WinCC flexible)
SIMATIC HMI HMI device MP 377 (WinCC flexible)
Operator Control and Monitoring Devices
Operator Control and Monitoring Devices
NETLink PRO Compact Handbuch
NETLink PRO Compact Handbuch
Mobile Panel 277 RO - Service, Support
Mobile Panel 277 RO - Service, Support
KT4H Temperature Controller
KT4H Temperature Controller