MP 277 - Service, Support Download

Transcript
Configuring the device
6.13 Restoring data from external storage device
Procedure
1. Press the "RESTORE" button to open the "Storage Card" dialog.
①
②
③
List of detected storage devices
Button to refresh the list of detected storage devices
Button to start the Restore process
2. Select the external storage device with the backup in the "Storage Card with Backup
detected" selection box.
Note
If several external storage devices with data backups are plugged in, the data cannot be
restored. Remove the external storage device with the data backups not needed.
The "--- no storage card available ---" message appears if there is no storage device in
the HMI device or if it is defective.
3. If the "--- no storage card available ---" message appears, press the "Cancel" button.
Restoring is then aborted.
– Insert the storage device or another one.
– Click "Refresh".
The content of the selection box will be changed.
– Select the external storage device with the backup in the "Storage Card with Backup
detected" selection box.
4. Click on the "Start Restore" button.
Restoring is started.
MP 277
Operating Instructions, 07/2014, A5E02479740-02
129