MP 277 - Service, Support Download

Transcript
Commissioning a project
7.9 Transferring and transferring back license keys
7.9
Transferring and transferring back license keys
7.9.1
Overview
With the purchase of an add-on package, you obtain a specific user license with an
associated license key. Once you have installed an add-on, transfer a license key to the HMI
device. The license key unlocks an add-on for use.
You can also transfer back the license key from the HMI device to a license diskette.
Note
License keys can only be transferred and transferred back with the Automation License
Manager or the configuration software.
The transfer and back transfer of license keys with the "Automation License Manager" is
described below. Information on transfer and back transfer of license keys with WinCC or
WinCC flexible is described in the associated online help.
7.9.2
Transfer of license keys with the Automation License Manager
Requirement
● The HMI device is connected to the configuration PC or to the PC with the "Automation
License Manager".
● If you use the configuration PC: The HMI device is selected in the project tree.
Procedure
To transfer the license keys, follow these steps:
1. Open the "Automation License Manager". On a PC without a WinCC installation, open the
"Automation License Manager" from the Windows Start menu.
The "Automation License Manager" starts.
2. Select the "Connect HMI device" command in the "Edit > Connect Target System" menu.
The "Connect target system" dialog opens.
3. Select the "device type" of your HMI device.
4. Select the "connection".
MP 277
154
Operating Instructions, 07/2014, A5E02479740-02